BOPP Labeling Machine

WS-150H linear OPP labeling machine is used to stick body label on bottle directly. It has hot glue melting system, label feeding station, vacuum sucking unit, bottle holding and rotating system, bottle transferring system and electrical controlling system. the label material is BOPP. when bottle is passing the machine, the label will be cutting, feeding, sucking, gluing and stick on bottle directly. The machine speed is 6000-10000BPH for 500ml. It is widely used in packaging of food and beverage manufacturing factories.

Features:

1. Adopt the overall vertical labeling mode, automatically label cutting, automatic labeling.

2. Microcomputer continuously variable control system, automatic detection in accordance with the feed, automatic adjustment of the production rate to maintain the labeling machine always in the best production rate.

3. Applying the star-wheel feeding, to ensure not pour the bottle under high speed.

4. Host Controller working with the frequency three-phase motor to control transmission.

5. Label supply applying the servo motor synchronous tracking cutting, specially designed vacuum drum high-speed absorption, accurate and stable labeling.

6. Transmission mode applying the linked design, stability and precision under high-speed labeling.

7. Electronic automatic calibration label cutting system, cutting precision up to plus or minus 0.5 mm.

8. Linked design encountering abnormal or unusual torque, the safety devices can automatically and immediately shut down the machine.

9. Labeling position can be adjusted up and down.

10. Hot melt machine below the set temperature, the labeling action can not be started.

11. Without label, the machine automatically stops, and the alarm function starts.

12. Label is not affixed, the machine automatically stops, and the alarm function starts.

Technical Parameters:

 1. Mechanical Dimensions: 3730 L * 1314 W * 1800 H (mm).

 2. Weight: About 2000 KG.

3. Label roller inner size: 6inch;

 4. Suitable bottle volume: round bottle (300ml-1500ml)

 5. Label diameter: 55-120mm

 6. Working efficiency: producing continuously will not less than 95%.

 7. Labeling tolerance: ±2mm.

 8. Labeling quality rate: more than 99.9%.

 9. Labeling speed: 6000-10000BPH.

 10. Power: AC 3φ 380V/50HZ.

 11. Total power consumption: 9KW.

 12. Compressed air consumption: 1 Mpa.

 13. Conveyor height: 1000±100mm.

Machine configuration:

l  Closed architecture main machine: Open door, the machine will be stop immediately;

l  Bottle in-feed: star wheel or screw (depending on bottle);

l  Bottle in-feed controlling: cylinder;

l  Bottle distributing: star wheel;

l  Label in-feed adjusting: servo system controlling;

l  Lighting: LED lamp;

l  Fixed label in-feed station: plane type quick label change;

l  Operation: single touch;

l  Electric cabinet working mode: column type electric cabinet, air-operated spin open;

l  Deviation correction module: E+L (optional);

l  Alarm system: alarm light & buzzer (no label, label break, door open);

l  Label system: physic adjustment friction type feed label lock;

l  Dynamical system: complete machine linkage independent servo label in-feeding;

l  Glue supplying system: ITW hot glue device or Nordson hot glue device;

l  Label cutting system: used multiple cure of cutting system;

Standard Electrical Configurations:

Suggest client do not change our standard electric configuration, in case that it effect machine working quality.