QGF-150 washing filling and capping machine is used to filling 3 gallon and 5 gallon jar, it contains washing unit, filling unit and capping unit. The capacity is 150BPH for 5 gallon, it is good investment for new investor and smaller beverage manufacturing companies.
Feature:
The machine frame is a welded structure of high quality carbon steel with the surface anti-rust treated and coated. The machine frame is wrapped with stainless steel sheet (AISI304).
The electrical cabinet is made of AISI304 stainless steel. From bottle in feed to bottle discharge, a PLC controls the fully automatic operation of the filling mono-bloc.
According to latest sanitary department requirement, the cap sterilizing unit is available and installed on top of capping unit.
The filling system totally has 9 steps, the washing media has disinfection liquid, pure water, etc.,
The high efficiency atomizing spray nozzle installed on the roof, rinsing water is spraying and cleaning of 5 gallon appearance.
Main configuration:
Element name | Brand |
Water pump | GNP |
Pneumatic components | AUTONICS |
Contactor | SCHNEIDER |
Thermal relay | SCHNEIDER |
Air switch | SCHNEIDER |
Proximity switch | TURCK |
Photoelectric switch | BANNER |
Filling valve | SS 304 |
Rinsing and working platform | SS 304 |
Main technical parameter:
l Suitable bottle:Φ270×490
l Filling head:1 pc
l Capping head:1 pc
l capacity:150BPH, cylinder
l total power:1.5KW (washing pump: 2 sets; filling pump: 1 set
l air pressure:0.6--0.8Mpa
l air consumption:150L/m
l water consumption:
washing water consumption: 0.3T/H(including:2 steps disinfection liquid washing, 2 steps aseptic water washing, 1 step drop water. the water use recycling.
Filling water consumption: 1.85T/H
l dimension:2500×630×1600
l weight:about 500 kg