How To Clean The Can Filling And Seaming Machine

Can filling and seaming machines have been used in many companies and enterprises. However, employees may not fully understand the can filling and seaming machine. In this article, to a certain extent, we will introduce the relevant knowledge of the can filling and seaming machine, including how the can filling and seaming machine works. I hope that after reading this article, the information obtained is helpful to you.

l How to clean the can filling and seaming machine?

l Precautions for the use of the can filling and seaming machine.

l Can filling and seaming machine products provided by the company.

How to clean the can filling and seaming machine?

Regularly clean the surface of the machine table, the bottom plate and the lower mold slide plate, the groove, the upper mold inner pressure plate and the positioning rod (Note: the power must be turned off and the normal temperature must be restored).

Grease is added to the transmission parts of the lower die slide plate, the pressure rod bearing, the eccentric wheel and the guide column, the guide rail and so on regularly to ensure the performance of the machine.

Method of cleaning the tooth knife: first plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold, pour it in until it is full, and then push it in

The lower mold slide plate is in place, the upper mold is pressed down to the lowest point, and the toothed knife is soaked for several minutes until it is cleaned, and repeated several times.

Precautions for the use of the can filling and seaming machine.

1. It is not suitable for metal containers and metal caps, and can not be placed on a metal table to press the start button, otherwise the can filling and seaming machine will be damaged.

2. Before turning on the power, the induction aviation plug must be inserted and the screws must be tightened.

3. Use a single-phase three-wire power cord. For the safety of the operator, a single-phase three-wire power socket must be used. The ground of the workplace must be dry to maintain insulation.

4. When transporting, storing, and using the can filling and seaming machine, it should not be hit, pressed, or damp.

Can filling and seaming machine products provided by the company.

Our company (WEIS) has a wide range of products. Mainly include plastic gloves, bottling machine, filling machine, filling and seaming machine, labeling machine, preform, palletizing system, etc. Among them, can filling and seaming machines include paint canning machines, jelly can filling and seaming machines, milk tea can filling and seaming machines, and fully automatic can filling and seaming machines. You can come to our company to check the can filling and seaming machine. If there is a can filling and seaming machine product that suits your needs, you can buy it. We will provide you with the best can filling and seaming machine products and services.

If you want to buy can filling and seaming machines and preform other products, you can consider our company (WEIS). Welcome to our company to buy can filling and seaming machine products, we will provide you with the best can filling and seaming machine products and services. We look forward to your visit. Finally, I wish you success at work, good health and a happy family.