Double Tunnel Film Shrinking Wrapper

WS-80S full automatic PE film shrink packaging machine is used to pack plastic bottle or container with setting arrangement on food and beverage production line. The speed is 60packs/min. It cannot only be solely used, but used simultaneously with other equipment to form packaging production line. It can automatically array, aggregate and align PET beverage bottle or other containers, then package it with shrinking film, finally produce finished products after shrinking by heating, cooling and forming. The packaged product is firmly bound with excellent appearance, which can be opened conveniently. Therefore, it is widely used in industries such as foodstuff, medicine, chemical and other light industrial products.

Main character

1.     Classic shape, beautiful, novel structure, unique, easy operation and maintenance. The use of pneumatic expansion support film roll, electronic sensor film delivery, sending film stable, fast and convenient for membrane.

2.     The "pre-cut film" technology (patented technology), the first cut off the film, through a separate servo-controlled "negative pressure transmission belt" up to the film, the smooth delivery of 0.045mm ultra-thin shrink film, film packaging costs further savings.

3.     Exclusive patented "pull-type" sub-packers to ensure that there is sufficient circulation between the package and the parallel package to enter, to ensure that the contraction effect.

4.     Feeding conveyor and host length is 1.6 meters longer than that of other companies configured, conducive to the bottle sorting, effectively increased membrane rods working- frequency, dramatically reduced the transmission line speed and increased tolerance of equipment performance.

5.     Shrink oven with dual independent channels, a unique cycle of air supply technology, to achieve multi-directional air flow control technology, adjustable wind speed, adjustable outlet position, greatly improving the shrinking effect.

6.     Shrink oven adopts the newly developed open structure outside, maintenance facilitated; thick insulation layer, energy-saving effect, high temperature controlled accurately.

7.     Electrical Configuration: Most of the whole electrical components are imported high-quality brands. After 10 years of optimal configuration, it is stable and reliable.

8.     The machine adopts energy-saving technology design, saving 30% electricity consumption, low-carbon, environmental protection than the previous generation.

MAIN SPECIFICATION

1. Working voltage：three-phase-five-line 380V/50hz

Control voltage: DC24V

2. Air compression ：pressure 0.6～0.8Mpa (without oil & water)

Air consumption: 80—100NL/min

Tracheal joint size: Φ10mm

3. Packing speed: 50-60 packs/min

4. Shrink chamber：L×W×H=2500×850×550(mm) 

5. Shrink tunnel temperature：160℃～230℃

6. Packing material：LDPE (dust & static electricity removed)

Width of film roll：≤600mm

Thickness of film：0.045～0.10mm

Diameter of film roll：≤350mm

Film reel diameter：76mm

7. Working noise：≤65dB

8. Average weight: 65KW

9. Total weight：4600kg

Electricity Configurations

 (Note: due to equipment upgrading or non-standard requirements, some electrical components will be replaced with products of the same brand, subject to the equipment configuration of the project)